460 EFI : Engine Swaps

Brian Patterson
Brian Patterson
5/5

Great way to upgrade you carb'd 460!! I bought a complete kit several years ago to upgrade the 1978 460 that I was putting in my 1965 truck. I could have gone with an aftermarket bolt-on injection unit but I love having factory stuff so I can repair the truck at local auto parts stores. I had the truck running but wanted to have the old school breather instead of the tall aluminum intake since it was going in the 65. I ordered and installed this low profile unit and love it!!!

4 years ago
Brent Johnson
Brent Johnson
5/5

This truck has been in my family since it was new and it has sentimental value or I would have unloaded it years ago. I’ve been at my wits end with it for sometime now. It’s been a gas guzzling gutless wonder since day one. When you’ve got 460 cubic inches under the hood and every time you think about passing you have to decide if you’ll have enough fuel left to get to the next gas station and enough horsepower to not die passing that Prius that’s in front of you there’s a problem and these guys can cure it for you!
I’ve spent more time searching forums trying to figure out my bad idle, mpg, hesitation and black exhaust smoke then I’ve spent talking to my wife in recent history (maybe the trucks not that bad after all). My go to tool has been a can of carb cleaner so that I could try to find the next vacuum leak. I’ve tried a cat back, cutting off the air horns, 6.0 tune up anything to try to improve the mpg or the hp with basically little to no improvement. To be frank I’ve spent more money in sensors in the last two years then I spent buying the twisted smog box and a throttle body. If your on this path or just starting down it just stop doing what you doing, your wasting your money and time just call these guys.
I finished putting my parts on and this thing moves like I never thought it could or would. Im not sure what the mpg is going to be in the end mostly because I can’t keep my foot out it but I’m using less going fast then I was going slow.
If your dream is to put on Mr Banks 2k kit as mine was don’t bother my friend had to begrudgingly admit that the 460 EFI Guys bolt ons had superior throttle response and acceleration compared to the Banks kit he has on his for less than 1/2 the price.
I got quick responses from Russel with a few questions I had and I have to say after 25 years in the automotive industry that it’s rare for the average Joe to get personal service from someone that’s the best at their specialty in this industry but that’s what you get here. I guarantee you that for 2k you won’t be hearing from Mr. Banks and won’t be anywhere near as happy with the finished product. If you want a smile like the guy on the you tube video that put these guys kit on his truck call Russel if you don’t call them carb cleaners .97 cents a can at Walmart I’d recommend a case. Well I guess I have to go talk to the wife but at least she’ll think I’m smiling at her. Thanks guys!!!!!

4 years ago
Brandon
Brandon
verified ownerverified owner
5/5

Used a 96' 460 in my 67' F250 using this conversion, and couldn't be happier. Saved me a lot of frustration trying to convert the harness myself, and made for a clean install. Had it running within a day of getting the harness.

Hook up power/ground/ignition signal to the ecu, plug in the connectors and it's ready to run. Do note the starter/alternator circuits will not be included in that, but they are dead simple to wire up.

4 years ago
Mike B.
Mike B.
5/5

I never imagined this old flatbed would pull my loaded skid steer trailer through the Rockies, down to sea level and back with as much power as it has now.
Recently added a E4OD, it made a great addition and gets me better mpg's than I thought it would.

4 years ago
Kennan C.
Kennan C.
5/5

You guys weren't kidding it was a lot easier than I could have imagined to install, and it runs amazingly. Have anyone who is considering getting one of these call me

4 years ago
Lou S.
Lou S.
5/5

We took it out for a test drive. This engine has the 1988 EFI 460 heads and it has no problem moving with traffic. My neighbor commented "My Honda CR-V couldn't keep up with you." Not bad for road wale RV.

4 years ago
Ryan Henderson
Ryan Henderson
verified ownerverified owner
5/5

This throttle body is great! So fast and responsive. I am amazed by how much power is in the old truck. I am also completely satisfied with the customer service. I was still figuring out exactly what I wanted when I called and Russel took the time to answer a lot of questions for me. I am completely happy with everything I have bought from them. I'll be calling them again when it is time to upgrade my other truck!

5 years ago
jeremiah simmons
jeremiah simmons
5/5

Did the throttle body and performance intake and it opened my truck up so much from Casper wy

5 years ago
Jeremy High
Jeremy High
5/5

The 460 engine I'm using to upgrade my 72 came out of a 90 model F-250. It ran but had numerous wiring issues with the fuel injection and other systems. Even though I was swapping the engine to an older truck i wanted to keep the modern convenience of fuel injection during the engine upgrade. I sent my damaged harness and the computer to Russel to build a stand alone EFI harness. The stand alone system simplifies the wiring harness tremendously and made a very daunting task into a much more simple task. All of the harness connectors are clearly labeled and bundled nicely. All you have to do is plug the connectors into the appropriate spot follow some basic instructions on how to connect a few more wires and that's it! This harness saved me a bunch of time and ultimately $$$. Cant wait to finish my build and get her on the street!

5 years ago

1200 cfm 4 barrel throttle body for 88-97 EFI 460

1200 cfm 4 barrel throttle body for 88-97 EFI 460. These are overkill for a mild 460 but a must for stroker motors or wild roller cam 460’s. This unit bolts directly to lower intake. Includes throttle cable and all needed hardware, new tps, and new iac. *does not include cruise control or C6 kickdown cable bracket yet*

Included with this kit:

  • 4 barrel low profile throttle body, throttle cable and all needed sensors
  • Throttle cable housing, inner-cable, and needed fittings for throttle
  • Idle air bypass
  • Throttle position sensor and pigtail
  • 5/8″ tubing and elbow for driver side breather port
  • Needed vacuum tubing for MAP sensing and fuel pressure regulator
  • 3/8″ NPT plug for the intake runner #5 (when needed)
  • ** Purchase a washable complete air Filter kit separately **

$890 (includes S+H)

Swap in a 460 that is already fuel injected

You can swap in a complete factory EFI 460 engine from a 1988-1997. If you already have a 460 that is still good you can take the heads and intake from the 88-97 and put them on any 460 engine. A 460 will even bolt up to the same bellhousing that a 351M or 400 will.  Is it time to rebuild your 460 or Modified engine, or are you simply ready to ditch your carburetor and ignition system? Even if you’re just looking to add better fuel economy and power to your vehicle, an engine swap can be done in a day or two.

From there just send us the harness and ECU from the fuel injected truck, and we will convert it to our full stand-alone system.  If you are missing the harness or ECU we keep them in stock also.

If you want to make even more power install the new low-profile throttle body kit and also our performance upgrade Intake. Read more about them below.

Stand-alone conversion service

$675 (includes S+H)

Interested in Full Tuning Capabilities and/or Data Logging

With help from our friends at twEECer.com our stand-alone systems have gotten even better. With the additional purchase of a twEECer system they are now fully tunable. Changes are quick and easy with any aspect of ecu operation including: timing characteristics or advance, air/fuel curves, rev limits, even cold start operation. Write and store multiple tunes that can be switched even while running. This allows you to have your own performance tune, daily driver tune, mpg tune, valet mode, or even a kill switch shut down setting.

Purchase an ECU from our stock for your stand-alone

We hand select ECUs and keep them in stock ready to go. Each one is installed and tested to confirm the best air/fuel parameters and timing curves. Which ensure these ECUs will support every engine from mild to wild flawlessly.

Purchase a cut and stripped harness from our stock for the stand alone service.

We keep a supply of wiring harnesses in stock. If you don’t get one when you found your EFI engine, we can use one of ours.

**These have already been cut for the stand-alone conversion service, and are not intended for a replacement harness for your 80’s or 90’s truck.**

Flowkooler - High Flow Water Pumps

Simply put, a stock volume water pump falls sadly short on a stock 460 powered truck, they simply don’t move enough volume. Even stock engines will fluctuate in temperature drastically from this problem. I have never seen anyone’s water pump keep up with these units. If you do any towing or have increased the power of your engine you will need help to move that massive amount of coolant faster. Your Ford engine and the ECU needs to stay within a specific temperature range to operate correctly. Too cold and you waste fuel, get too hot and the ECU leans the air fuel curve and overheats the engine even further. We searched high and low for a pump that actually worked with the stock radiator tubes, pump shaft, and fan bolt pattern. We were thrilled to find Flowkooler water pumps. But before we offered or recommended any part to anyone we thoroughly tested these first. We installed a few on our built up engines we were installing. What we found was this pump always held the temperature much much closer to the thermostat rating than you could ever expect out of a stock water pump.

In Stock Now!!!
1970-1987 Ford 460/429 truck car and van

(early years had a few shorter water pump bolts. This pump can be used in 88-97 by shortening those bolts and adding washers behind the serpentine brackets for spacing, but CAN NOT be used with oil/heat exchanger box). The same applies to van, car 7.5 / 460, 7.0 / 429 high flow water pump

1970-1987 Ford F-100, F-150, F-250, F-350, F-450 / Super duty with 7.5 460
1970-1987 Ford E-250 E-350 Econoline Van or Rv with 7.5 460
1970-1987 Ford 460 / 429 with 7.5 460
460 swap where you are using a stock oil filter or remote oil filter kit

$205 (Includes S+H)

In Stock Now!!!
1988-1997 Ford truck and van 7.5 / 460 high flow water pump with remote oil cooler or for swaps when using the serpentine brackets

(This has the standard large inlet and works with serpentine brackets and remote oil cooler lines. IT DOES NOT WORK WITH OIL/HEAT EXCHANGER BOX that is part of the oil filter bracket)

1988-1997 Ford F-250, F-350, F-450 / Super duty,  with 7.5 460
1988-1997 Ford E-250 E-350 Econoline Van or Rv
any year swap when using the serpentine brackets

$205 (Includes S+H)

Brian Patterson
Brian Patterson
5/5

Great way to upgrade you carb'd 460!! I bought a complete kit several years ago to upgrade the 1978 460 that I was putting in my 1965 truck. I could have gone with an aftermarket bolt-on injection unit but I love having factory stuff so I can repair the truck at local auto parts stores. I had the truck running but wanted to have the old school breather instead of the tall aluminum intake since it was going in the 65. I ordered and installed this low profile unit and love it!!!

4 years ago
Ryan Henderson
Ryan Henderson
verified ownerverified owner
5/5

This throttle body is great! So fast and responsive. I am amazed by how much power is in the old truck. I am also completely satisfied with the customer service. I was still figuring out exactly what I wanted when I called and Russel took the time to answer a lot of questions for me. I am completely happy with everything I have bought from them. I'll be calling them again when it is time to upgrade my other truck!

5 years ago
jeremiah simmons
jeremiah simmons
5/5

Did the throttle body and performance intake and it opened my truck up so much from Casper wy

5 years ago
Jeff nelson
Jeff nelson
verified ownerverified owner
5/5

Well let me start by saying my truck was completely stock 460 absolutely nothing done to it. Now I have headers redone heads just cause my old exhaust manifold studs snapped off in the head but yes headers and I had my intake done by russle and this low profile throttle body. Just like it states everything is plug and play would recommend if your not a mechanic to take pictures of where all the sensors and vacuum lines go but just so it's easier when going back together. Now that I have that put of the way the power and throttle response everything is ridiculous I still cant believe how just the three things I did literally woke this truck up I am absolutely in love with the power everything. My new 73 460 I just bought will be getting these same parts done by russle and I cant wait. The advice and help you get as well from russle is amazing he will literally help you threw the entire install and do what he can to make sure your truck is running just as good as mine is I highly recommend all of his products they are amazing.

5 years ago

Low Profile Throttle Bodies for the 7.5 liter 460

** DOES NOT WORK WITH MAF (Mass Air Flow trucks) **

SPEED DENSITY HAVE 2 INTAKE TUBES CONNECTED TO THE AIR FILTER BOX

By swapping to this throttle body, you will get better throttle response, increased horsepower, increased torque, and best of all it will improve your mpg’s. Your engine will come to life and perform like the beast it truly is. This throttle body improved our 0-60 times by 2 full seconds. We did 12 runs with the original throttle body and this one just to confirm it.  Our 1995 crew cab long bed with a 460 / C6 auto picked up 2-3 mpg’s.

Included with this kit:

  • Holley low profile throttle body, throttle cable and all needed sensors
  • Throttle cable housing, inner-cable, and needed fittings for throttle and cruise control
  • Idle air bypass, pigtail and tube
  • Throttle position sensor and pigtail
  • 5/8″ tubing and elbow for driver side breather port
  • 14″ Air Filter Base (we drill and install a grommet for the IAC)
  • 1″ air filter spacer (makes the install easier with more room over the fuel rails)
  • MAP sensor and fuel pressure regulator vacuum tubing
  • 3/8″ NPT plug for the intake runner #5 (when needed)
  • ** Purchase a washable complete air Filter kit separately **

Spare TPS and IAC

Would you like to have a backup Throttle Position Sensor and Idle Air Control Valve. In this day and age of horrendous delays this way you can carry a set of our tried and true backups.

$90 (includes S+H)

Ted Montanye
Ted Montanye
5/5

I am running this intake manifold on my 1995 CCLB F350 7.5l. I noticed the difference immediately. I feels that this beast can breathe so much better! I would recommend this for anyone wanting to gain some extra HP out of their old 460.

4 years ago
Ryan Henderson
Ryan Henderson
verified ownerverified owner
5/5

This intake is amazing. I inspected the intake manifold inch by inch when it arrived and I loved it. There is definitely noticeable more power now that there is better airflow. Russel does an amazing job, not only with the parts but also with his customer service. He went out of his way to make sure I got my core charged returned to me. I bought several products from these guys and I am completely satisfied with all of them.

5 years ago
jeremiah simmons
jeremiah simmons
5/5

Did the throttle body and performance intake and it opened my truck up so much from Casper wy

5 years ago
Rick Williams
Rick Williams
verified ownerverified owner
5/5

Amazing results, tons of noticeable power. The intake manifold really let the motor get air and breath.
Thanks Russell for all the awesome products, and all the continued technical support with your products. Even though it is a work in progress, it is well under way to being restored.
460 EFI guys really know how to turn the 460 into a tire ripping beast.

5 years ago
Jeff Nelson
Jeff Nelson
verified ownerverified owner
5/5

Russle did a amazing job with turn around of the intake to how it looks and performs it's seriously a huge upgrade for these old 460. I already purchased another 460 so I will be getting another one done for my other project. I have the low profile throttle body as well and I must say the throttle response and power I have now is a drastic change from how my truck was stock. I was border line gonna get rid of the truck cause of the lack of power now it's not even a option.

5 years ago

Performance Modified Intake

We are proud to offer the only performance upgrade intake for 1988-1997 460’s. Whether you have built up your 460 or wanting more out of your stock motor letting it breath is always the answer to more horsepower and torque. Having seen the drastic performance increase with ported and balanced single plane manifolds paired with multi-port efi we had to give it a shot. The result was an instant and undeniably increase in powerStarting with Ford’s factory intake we start by cutting the stair-stepped bottom out. From there we remove all the internal passages. They are cut back into a balanced much short length. The air no longer has to get drawn through long runners that make sharp 90 degree turns. Instead each cylinder can now easily draw the air it needs to make the power a 460 is capable of. The easiest way to describe the difference is, instead of downshifting just lay into the throttle and watch the speedo climb. As always, we did 12 time trial pulls before and after the intakeThe difference was 1.75 seconds difference in 0-60 in the pictured blue and white 9000 lb. Monster. Everyone who has gone for a ride has said they all felt a huge difference. As the driver it feels like I just unhooked the flatbed trailer.

Depending on how quickly you need your new intake, there are two purchasing options:

Option 1: We don’t charge a core charge. You send us your intake for this service, and we verify that it’s usable. If it is, we send your new intake out the same day. Price includes S+H on delivery of your new intake.

Option 2: If you need your new intake faster, pre-pay the refundable core charge of $230. We will immediately ship your performance modified intake, simply send us your old one. Once we receive your intake in usable condition we refund the core charge fee.

OPTION 1: WITHOUT CORE CHARGE

$470 (includes S+H)

OPTION 2: WITH CORE CHARGE

$700 (includes S+H)

460 EFI Heads to Carbureted Headers Adaptors

Instead of spending a lot of money on swap headers, you can run 460 headers for your year and application with our adaptor plates. These are CNC water jet cut from 3/16″ thick steel, and will allow you to bolt pre-EFI headers to the 460 EFI heads. You will need to pick up EFI gaskets and carbureted gaskets of your choosing.

$125 (includes S+H)

Premium Springs, Locks, and Retainers Kit: 1988-1997 EFI 460

Do you wonder why your 460 has lost power over the years?  Well after 30 years your springs are dead and soft.  They should be 100 lbs at the seat, and over 250 at the nose of the cam.  Most we measure are lucky to have 45 lbs at the seat and only 130 over the nose.  Often they are even worse off than this.  This means you are floating valves and losing compression, power, and efficiency.  We have measured hundreds of combinations and partnered with Howards Cams to bring you a premium set-up that will increase the available lift to more than any other combination can offer.  This will allow you to run our stage 2, stage 3, and stage 3 + cams without having to have the guides cut down.  You will want to still measure the available room as a few sets of the early E7 heads had a little less.

$230 (Includes S+H)

Howards Cams "460 EFI Guys Stage 1" Kit for EFI and Carb 460

.490 / .519 Lift, 112 LSA, 205 / 213 duration @ .050 lift, 4 degrees advance cut in for 108 intake centerline.  This is a clean and crisp torque cam that will not disappoint all the way up to the rev-limiter.

1 LEFT IN STOCK NOW!!!
Includes:
  • Howard’s hydraulic flat tappet camshaft
  • Howard’s lifter set
  • True Roller Double-Roller Adjustable Timing Chain and Gear Set
  • new springs, locks and retainers
  • camshaft assembly lube
  • Oil Pump priming rod

After years of trying hand fulls of camshafts we decided to modify our favorites and make our own lines.  We partnered up with Howard’s cams to get these custom made to our specifications.  Like so many others, we have fought low quality cams failing on us.  Not willing to take any chances ever again, we are thrilled to have partnered up with Howard’s Cams, and their unrivaled quality.  To be able to run this camshaft you have to swap to the included springs, locks, and retainers.  We have always had great spring pressure with this setup, however it is your responsibility to confirm proper spring pressure.

An absolute must is to break  in your camshaft with Lucas Engine Break-In Oil 10631 you will want 2 gallons.

$825 (Includes S+H)

Howards Cams "460 EFI Guys Stage 2" Kit for EFI and Carb 460

.519 / .519 Lift, 112 LSA, 219 / 225 duration @ .050 lift, 4 degrees advance cut in for 108 intake centerline.

This is an awesome all around EFI friendly cam.  It has a great exhaust tone, flat and strong torque curve, and will work flawlessly with Speed density EFI and make great power.  This cam will work with your stock speed density ecu and does not require a higher stall convertor. We have passed emissions tests with this cam flawlessly.

6 IN STOCK NOW!!!
Includes:
  • Howard’s hydraulic flat tappet camshaft
  • Howard’s lifter set
  • True Roller Double-Roller Adjustable Timing Chain and Gear Set
  • new springs, locks and retainers (these are shaved retainers for this cam’s intake lift)
  • camshaft assembly lube
  • oil-pump priming rod

After years of trying hand fulls of camshafts we decided to modify our favorites and make our own lines.  We partnered up with Howard’s cams to get these custom made to our specifications.  Like so many others, we have fought low quality cams failing on us.  Not willing to take any chances ever again, we are thrilled to have partnered up with Howard’s Cams, and their unrivaled quality.  To be able to run this camshaft you have to swap to the included springs, locks, and retainers.  We have always had great spring pressure with this setup, however it is your responsibility to confirm proper spring pressure.  We have had numerous customers pass emissions with this cam, even in the strictest states.

We can’t keep these on the shelf Pre-order now:  we have 10 of these heading our way, and will have them ready to ship 8/15/24.  However, Howards has always exceeded delivery expectations for us, so it may be sooner.

An absolute must is to break  in your camshaft with Lucas Engine Break-In Oil 10631-1 you will want 2 gallons.

$825 (Includes S+H)

Howards Cams "460 EFI Guys Stage 3" Kit for EFI and Carb 460

.513 / .536 Lift, 112 LSA, 215 / 225 duration @ .050 lift, 4 degrees advance cut in for 108 intake centerline.

You can absolutely hear this cam.  It is a tire frying animal.  It is actually an improved upon design based off of the towing beast cam design.  It has worked great with EFI.  We have run even larger cams than this with the stock efi computers, but we learned to trim those back to this spec to be much happier for a daily driver, but still deliver great results.  This one has an aggressive exhaust tone, flat and strong torque curve, and will work with Speed density EFI and make great power.

4 IN STOCK NOW!!!
Includes:
  • Howard’s hydraulic flat tappet camshaft
  • Howard’s lifter set
  • True Roller Double-Roller Adjustable Timing Chain and Gear Set
  • new springs, locks and retainers
  • camshaft assembly lube
  • oil pump priming rod

After years of trying hand fulls of camshafts we decided to modify our favorites and make our own lines.  We partnered up with Howard’s cams to get these custom made to our specifications.  Like so many others, we have fought low quality cams failing on us.  To be able to run this camshaft you have to swap to the included springs, locks, and retainers.  We have always had great spring pressure with this setup, however it is your responsibility to confirm proper spring pressure.

An absolute must is to break  in your camshaft with Lucas Engine Break-In Oil 10631-1 you will want 2 gallons.

$825 (Includes S+H)

V-Band Converted Headman Headers For EFI 460 F250 And F350

These also work for 1980-1997 Bronco & f150 swaps.

These are our in-house go-to headers once they have been converted with V-band clamps. These fit with the ZF5, E4OD, & C6 transmissions. We can also modify them for the larger milodon oil pan.

These come with header bolts and header gaskets.

Typically 1-2 weeks from purchase ship time.

$715 (Includes S+H)

Harland Sharp 7.5 Pedestal Mount Roller Rockers

Pre-Order Now!

460 EFI Guys just teamed up with Harland Sharp to offer our customers the highest quality roller rockers for their factory 460 heads.  These are a full and adjustable pedestal mount roller rocker set.

Kit includes:

  • 16 adjustable roller rockers, pedestal feet and bolts

Fits:
1974 to 1997 Ford 7.5 460 V8
for spring pressures up to 350 lbs (enough for a roller cam with .600 lift)

Adjustable rocker set

  • These roller rockers are designed to be a replacement for the factory rocker arm. Simply remove the factory rockers and replace them with your new Harland Sharp roller rockers. Simply turn and set the pushrod adjuster to set preload.  We recommend always checking for head & valve cover clearance and proper lifter preload.

$650 (includes S+H)

Bullet-Proof Motor Mount Kits + Frame Perches

After having every motor mount we have purchased fail we decided to make our own. These are a fully caged polyurethane motor mount kits. They hold the engine absolutely stable but won’t vibrate you to death. They will handle high horsepower engines but are daily driver friendly. Ours are built at zero degrees with a stock nose up engine. Many other companies are not. Each of our mount kits are made of DOM tubing, polyurethane bushings, plate steel and grade-8 hardware. A pro-rated warranty is laughable. Simply put if these ever fail or wear out we replace them free of charge.

randy hanes
randy hanes
5/5

Motor mounts were a perfect fit for our 460 swap!!! great service and fast delivery!!!

3 years ago
James Mcgeoghegan
James Mcgeoghegan
verified ownerverified owner
5/5

Greatest motor mounts ever. I've now purchased 4 set of these mounts, running them on 2 pull trucks and 2 street trucks. 1 of them are bolted to a monster 572 handles it no problem.

4 years ago
James
James
5/5

Excellent quality construction and a perfect fit on my 79 bronco.
Saved me a bunch of time and headache!

5 years ago
Ryan Henderson
Ryan Henderson
verified ownerverified owner
5/5

These are the best motor mounts I have ever had on a vehicle. I put them on my 1995 F350 and even with the decked out 460 these mounts keep the engine right where it needs to be. I bought several products from these guys and all of them have been excellent. I could not be happier.

5 years ago
Jeremiah Simmons
Jeremiah Simmons
5/5

doing launches with the low profile throttle body and intake. The hood is still off and I can see the motor isn't moving. But feels the same in the cab, no vibration. Wish i had done these sooner. From Casper Wyoming

5 years ago
Jason G
Jason G
5/5

These motor mounts are the greatest thing i did to my truck (1996 F250 460) Before i installed these the motor rocked around the engine bay like a squirrel in a cage with too much red bull. The instant i installed these i notice a crazy big difference. these bolted right up to the stock install location with no issue and still managed to keep vibration down. All-in-all VERY BADASS motor mounts.

5 years ago
Jeff Nelson
Jeff Nelson
verified ownerverified owner
5/5

These motor mounts are amazing they are probably the most solid mounts I have ever seen and it is nice when you hit the gas pedal the truck shakes like a muscle car instead of the engine rocking back and forth In the engine bay highly recommend these.

5 years ago

1988-97 F250/F350 460/7.5 Saginaw Power Steering Conversion Service and Kit for the EFI 460 Bracket

* If you’re doing a EFI 460 engine swap into a different year than 1988-1997 we need to know what the gearbox’s high pressure line’s threads are.*

Ditch the groaning, low pressure ford pump, and convert to our kit.  We put these brackets through a 12 step process that converts the stock bracket and allows you to use a saginaw power steering pump. These pumps are an off the shelf part from your local parts store, or you can even a chrome aftermarket pump if you want.  We also include all the needed mounting bolts, adapter fittings, a braided stainless high pressure line, the low pressure line, hose clamps. and the pulley for the conversion.  These come back to you fully cleaned, modified, with all the needed conversion parts, and fully painted.

Parts included with the conversion kit:

Modified bracket

Power steering pulley from Tuff Stuff Performance

Chrome cap / dipstick from Tuff Stuff Performance

Stainless braided high pressure line from Allstar Performance

all needed line fittings and adapters (pump and steering box)

Low pressure return line and hose clamps (dayco and gator clamps)

gold iridate grade 8 pump mounting bolts

Parts needed:

460 EFI Van saginaw pump -75$ (part # 731-2153)  Or aftermarket saginaw pump

Parts Store Rental Tools:  power steering pulley puller / press and line flaring tool (bubble flaring the end is strongly suggested)

Depending on how quickly you need your new bracket, there are two purchasing options:

Option 1: We don’t charge a core charge. You send us your old bracket, and we send you one that’s already done.

Option 2: We charge a $250 core charge. This way, if you can’t afford the down time with your truck, pre-pay the additional refundable core charge of $250. From there, we will immediately send one out. Once we receive your old bracket back in usable condition we refund the core charge.  If the water pump ear is broken off we just adjust the core charge refund down to $200.

$675 (Includes S+H)

WITH CORE CHARGE
$925 (Includes S+H)