460 SWAP MOTOR MOUNT KITS TO REPLACE 351M/400 351W 302
If you are swapping from a 351M, 400, 351W or 302 to a 460 these will bolt directly to the perches that your truck, or bronco already have. They are for the year range 1974-1982. Additionally, they are built to the correct dimensions to allow you to use the full serpentine system and accessories of a stock EFI 460.
460 SWAP UNIVERSAL MOTOR MOUNT KITS
We have had countless customers utilize our 351M swap mounts as a universal motor mount. Why redesign the wheel if these work so well. We include (but do not weld) the perch bolt to give you more flexibility. Bolt them onto the engine then you can build your own frame perches from these out to the frame.
Ford 5.0 Intake Performance Package
These kits include the Edelbrock Victor Junior EFI Intake manifold and fuel rails. We also include our low profile throttle body. The factory intake is restrictive and draws air through great lengths of individual runners. By bolting on this setup your engine doesn’t have to breath through 8 long small straws. Allowing your engine to make much more power. You also will have a throttle response like never before. Almost everything you need to compete the swap comes in the kit
- Edelbrock intake and fuel rails
- Our Low-Profile Throttle Body (includes brand new idle air bypass and pigtail, and new TPS and pigtail)
- An adjustable Fuel Pressure Regulator with gauge
- New Conversion Throttle cable
You can increase the pressure and the volume of your fuel injectors with the included adjustable Fuel Pressure Regulator. You can also reuse your other factor sensors. All you will need is; Intake gaskets, some rubber fuel lines, and a flaring Tool. We recommend installing a wide band air fuel gauge, incase you need larger injectors.
RV and VAN 460 MOTOR MOUNTS – 1982-1997
For the vans and RVs with a bolt spacing of 5 5/8″ these will replace the factory motor mounts, and you will re-use the cups that are bolted to the engine. Ditch those squishy water bed style factory motor mounts. These Bullet-Proof motor mount kits will bolt directly in place of the factory mounts. Our goal was to make a quality mount that could handle high horsepower, keep your motor locked down and be smooth enough to use as a daily driver. These are built so well if there’s ever an issue, we replace them free of charge.
