1977-1979 – F-250/F-350 4X4 MOTOR MOUNT PERCHES
These are an upgraded replacement for the 351m/400 motor mount perches. If your’s are missing or damaged, these will work for you – or if you are looking to swap in a 460 these can be used with our 460 Swap Motor Mounts.
1988-1997 – FORD F-250/F-350 2WD/4WD 460 MOTOR MOUNT KITS
Ditch those squishy water bed style factory motor mounts. These Bullet-Proof motor mount kits will bolt directly in place of the factory mounts. Our goal was to make a quality mount that could handle high horsepower, keep your motor locked down and be smooth enough to use as a daily driver. These are built so well if there’s ever an issue, we replace them free of charge.
Ford 5.0 Intake Performance Package
These kits include the Edelbrock Victor Junior EFI Intake manifold and fuel rails. We also include our low profile throttle body. The factory intake is restrictive and draws air through great lengths of individual runners. By bolting on this setup your engine doesn’t have to breath through 8 long small straws. Allowing your engine to make much more power. You also will have a throttle response like never before. Almost everything you need to compete the swap comes in the kit
- Edelbrock intake and fuel rails
- Our Low-Profile Throttle Body (includes brand new idle air bypass and pigtail, and new TPS and pigtail)
- An adjustable Fuel Pressure Regulator with gauge
- New Conversion Throttle cable
You can increase the pressure and the volume of your fuel injectors with the included adjustable Fuel Pressure Regulator. You can also reuse your other factor sensors. All you will need is; Intake gaskets, some rubber fuel lines, and a flaring Tool. We recommend installing a wide band air fuel gauge, incase you need larger injectors.
Ford 5.8 Intake Performance Package
These kits include the Edelbrock 351W Super Victor EFI intake and fuel rails. We also include our low profile throttle body. The factory intake is restrictive and draws air through great lengths of individual runners. By bolting on this setup your engine doesn’t have to breath through 8 long small straws. Allowing your engine to make much more power. You also will have a throttle response like never before. Almost everything you need to compete the swap comes in the kit
- Edelbrock 351W Super Victor EFI intake and fuel rails
- Our Low-Profile Throttle Body
- Adjustable Remote Fuel Pressure Regulator
- Throttle cable, sensors, and all needed hardware
If you have any of these parts call us and we can adjust the price accordingly. All you will need is; Intake gaskets, some rubber fuel lines, and a flaring Tool. Depending on if your engine is built up you may also need larger injectors.